Woodward

APECS 0225 Linear Actuators

    APECS 0225 actuator for construction, industrial, and agricultural equipment

    0225 CoverBall bearing design of the APECS 0225 linear actuator reduces friction and delivers precise engine control. This design minimizes heat buildup, resulting in more consistent force and improved position repeatability.

    Woodward actuators are easily installed by mounting near the fuel system and direct connecting to the fuel control rod or lever. In most installations, the normal rotary-to-rotary connection is eliminated, resulting in a more trouble-free and accurate control system.

    APECS 0225 actuators are suitable for diesel, gasoline, or natural gas engines with fuel system force requirements of less than 6 pounds (26.7 N) of force. Speed governing applications include generator sets, pump sets, wood chippers, forklifts and other off-road vehicles.

    0225 with boot.jpg0225 actuator with protective boot and clevis plunger is also available.

     
    • Ball bearing design for reduced friction, resulting in more precise engine control
    • Fast response
    • Designed to minimize heat buildup, resulting in consistent force and improved position repeatability
    • Small & compact
    • Push or pull actuation
    • Spring return to minimum fuel
    • Mounts in any position
    • Precise repeatability
    • Meets INR & EMP for moderate tactical battlefield environment
    • 2-hole, 4-hole, and base mount flanges for drop-in replacement of DYNA 2000 actuators
     

     

    Electrical 

    Input Voltage Range: 

          12 Vdc                     24 Vdc 

    Nominal Steady State Current: 

           2.5 A                        1.0 A

    Maximum At Stall 

    @ 75°F (24°C): 

    @ 250°F (125°C): 

              

            5.4 A                       3.0 A

            3.9 A                       2.0 A

    Performance

    Resistance 

    12 Vdc:

    24 Vdc: 

     

    1.8 Ohm

    7.2 Ohm

    Force w/o Internal Spring: 

    6.5 lbf (28.9 N)

    Work w/o Spring: 

    0.54 ft-lb (0.734 N-m)

    Shaft Travel: 

    0.975-1.025” (24.76-26.03 mm)

    Response Time 

    Nominal for 63% of Stroke:  

    0.05 sec ON Time

    0.035 sec OFF Time

     Environmental 

    Operating Temperature: 

    -65°F to +250°F (-55°C to +125°C)

    Vibration: 

    5 to 500 Hz Curve L per Mil-Std 810C

    Case: 

    Corrosion resistant, plated steel housing and mounting base/flange

    Sealing: 

    Oil, water, and dust resistant

    Weight: 

    2.7 lbs (1.22 kg)

     

     

    Figure 1. Two-Hole Flange Pull Type Actuator 

      Figure 1. Two-Hole Flange Pull Type Actuator 

    Figure 2. Two-Hole Flange Pull Type Actuator  

     Figure 2.. Two-Hole Flange Pull Type Actuator 

    Figure 3. Two-Hole Flange Pull Type Actuator 

     Figure 3. Two-Hole Flange Pull Type Actuator 

    Figure 4. Two-Hole Flange Pull Type Actuator  

      Figure 4. Two-Hole Flange Pull Type Actuator 

     Figure 5. Two-Hole Flange Pull Type Actuator 

     Figure 5. Two-Hole Flange Pull Type Actuator 

     Figure 6. Two-Hole Flange Pull Type Actuator  

     Figure 6. Two-Hole Flange Pull Type Actuator 

     

     

     APECS 0225 Linear Actuators 

    PART
    NO.
     

    ACTUATION 

    VOLTAGE 

    MOUNTING STYLE 

    PLUNGER TYPE 

    TERMINATION 

    RETURN SPRING* 

    Push 

    Pull 

    12 V 

    24 V 

    2-Hole
    Flange
     

    4-Hole
    Flange
     

    Base 

    External
    M-6
    Thread
     

    Connector 

    S3 

    8225-1001 

     

     

     

     

    8225-1002 

     

     

     

     

    8225-1003 

     

     

     

     

    8225-1004 

     

     

     

     

    8225-1005 

     

     

     

     

    8225-1006 

     

     

     

     

    8225-1007 

     

     

     

     

    8225-1008 

     

     

     

     

    8225-1009 

     

     

     

     

    8225-1010 

     

     

     

     

    8225-1011 

     

     

     

     

    8225-1012 

     

     

     

     

     

     

    *Spring Chart 

    SPRING TYPE 

    PART NO. 

    DE-ENERGIZED SPRING FORCE 

    ENERGIZED SPRING FORCE 

    SPRING RATE 

    S3 

    1520-1120

    1 lb (4.45 N)

    7.8 lbs (34.7 N)

    6.85 lb/in (0.126 kg/mm)