easYgen-3000XT Series
Paralleling Genset Controllers for Diverse Applications
The easYgen-3000XT Series controllers operate gensets of all sizes and applications. These controllers include specifically designed algorithms and logic to start, stop, control, and protect the genset, circuit breaker, and the utility where applicable. This technology allows standardizing on a single, affordable genset controller for distributed power generation applications. These applications can range from single stand-alone emergency backup power to parallel load sharing of multiple gensets in complex, segmented distribution systems with multiple utility feeds and tie breakers.
The easYgen-3000XT Series paralleling genset controllers provide exceptional versatility and value for OEM switchgear builders, generator packagers, and system integrators.
Benefits include:
High Flexibility and Reduced Efforts for variants at different applications. One devise fits most applications
Saves Cost of additional PLC as logical/analog operations can be handled by the control’s LogicsManagerTM / AnalogManagerTM
High Robustness against external disturbances ensured by galvanic isolation of the measuring inputs, relay contacts, biasing outputs, and communication interfaces
Simplified Configuration and Commissioning through Ethernet and USB connectivity, on-board documentation and system update function
Drop-In Replacement extends system longevity
Full Mains, Generator, and Engine Protection minimizes additional protection relays in low voltage applications
14 Built-In Languages enable your genset to speak your local language at the touch of a button
See below for detailed info on easYgen-3000XT controllers
The easYgen-3000XT Series controllers are available in three base packages with three variants in each:
- Door Mounted (plastic housing)
- Back Panel Mounted (metal housing)
- Low Ambient Temperature (plastic housing)
easYgen Models
|
Standard Paralelling
|
Complex Paralleling
|
Co-Gen / CHP
|
Variants
|
Door
|
Back Panel
|
Low Temp
|
| 3100XT-P1 |
x
|
|
|
|
x
|
|
| 3200XT-P1 |
x
|
|
|
x
|
|
|
| 3200XT-P1-LT |
x
|
|
|
x
|
|
x
|
| 3400XT-P1 |
|
x
|
|
|
x
|
|
| 3500XT-P1 |
|
x
|
|
x
|
|
|
| 3500XT-P1-LT |
|
x
|
|
x
|
|
x
|
| 3400XT-P2 |
|
|
x
|
|
x
|
|
| 3500XT-P2 |
|
|
x
|
x
|
|
|
| 3500XT-P2-LT |
|
|
x
|
x
|
|
x
|
easYgen-3200XT-P1: This is the "Standard Paralleling" door-mounted model suitable for isolated operation of a single genset or load sharing of up to 32 gensets in islanded and/or parallel operation with a single utility. The easYgen 3100XT-P1 is a back panel model housed in rugged metal without a display. A sophisticated touch screen remote panel (RP-3000XT) complements all easYgen-3000XT series products as an operator control panel. The easYgen-3200XT-P1-LT is designed to operate down to -40° C for outdoor applications. (Availability: Ready to Order)
easYgen-3500XT-P1: The Package 1 "Complex Paralleling" door-mounted model includes all the features of the easYgen-3200XT-P1 variant plus provision for redundant Ethernet load share communication capability and connectivity to up to 16 Woodward LS-5 circuit breaker controls. This allows control of complex distribution systems having multiple utility feeds and tie breakers, and parallel load sharing of up to 32 generators on up to 32 different bus segments. Back panel mounting variant (easYgen-3400XT-P1) with remote panel support and low temperature variant (easYgen-3500XT-P1-LT) are also available. (Availability: Ready to Order)
easYgen-3500XT-P2: The Package 2 "Co-Gen/CHP" door-mounted model mimics the features of the easYgen-3500XT-P1 variant and offers an expanded onboard discrete and analog I/O set plus an expansion card slot for an additional interface/protocol. Back panel mounting variant (easYgen-3400XT-P2) with remote panel support and low temperature variant (easYgen-3500XT-P2-LT) are also available. (Availability: Ready to Order)
The chart below provides details on identifying the correct easYgen-3000XT model and item number for your application.
Model:
easYgen-...
|
...
-3100XT
-P1
|
...
-3200XT
-P1
|
...
-3400XT
-P1
|
...
-3500XT
-P1
|
...
-3400XT
-P2
|
...
-3500XT
-P2
|
| Mounting |
Back panel
|
Front panel
|
Back panel
|
Front panel
|
Back panel
|
Front panel
|
LCD
display |
--
|
x
|
--
|
x
|
--
|
x
|
Internal dicrete
inputs / outputs |
12 / 12
|
12 / 12
|
12 / 12
|
12 / 12
|
23 / 22
|
23 / 22
|
External discrete
inputs / outputs |
32 / 32
|
32 / 32
|
32 / 32
|
32 / 32
|
32 / 32
|
32 / 32
|
Internal analog
inputs / outputs |
3 / 2
|
3 / 2
|
3 / 2
|
3 / 2
|
10 / 5
|
10 / 5
|
External analog
inputs / outputs |
16 / 4
|
16 / 4
|
16 / 4
|
16 / 4
|
16 / 4
|
16 / 4
|
| LS-5 support |
--
|
--
|
x
|
x
|
x
|
x
|
Redundant Ethernet
communication |
--
|
--
|
x
|
x
|
x
|
x
|
| 690 Vac sensing |
--
|
--
|
x
|
x
|
x
|
x
|
| Expansion card slot |
--
|
--
|
--
|
--
|
x
|
x
|
Part Number
(standard Op. temp.) |
8440-2081
|
8440-2082
|
8440-2084
|
8440-2085
|
8440-2087
|
8440-2088
|
Part Number
(Operating temp.
+70° to -40° C) |
8440-2083
|
8440-2086
|
8440-2089
|
easYgen-3000XT Features
- AMF (automatic mains failure) detection, decoupling and emergency run with dead bus close
- Automatic synchronization: phase-match, positive/negative slip-frequency, run-up (dead field) paralleling and synch check (ANSI 25)
- Circuit breaker close/open control: GCB (generator circuit breaker) only, GCB and MCB (mains circuit breaker) as ATS (automatic transfer switch) function, or external (no) control
- Proportional load/var sharing (isochronous or droop) of up to 32 gensets, regardless of individual size
- Base loading, import/export control, asymmetrical loading (through external base load input)
- Automatic generator set sequencing, load dependent start/stop for improved generation system efficiency
- Asynchronous (induction) generator control
- Engine, generator and utility protection functions, with fully programmable settings
- True RMS voltage and current sensing (gen, bus and mains) for reduced susceptibility to harmonics
- CAN network communication/control to engine ECU (engine control unit). Standard SAE-J1939 protocol and several proprietary engine OEM protocols are supported)
- Serial Modbus RTU (slave) communication for SCADA annunciation and external control
- USB connection via PC/laptop with Woodward ToolKit service tool
- Ethernet connectivity to load share, remote panel, ToolKit, SCADA and PLC protocol
- Compliance agency/marine approvals: CE, UL/cUL, CSA, BDEW, ABS, Lloyd's Register
Common easYgen-3000XT applications
- Emergency standby: data centers, hospitals, commercial and industrial facilities
- Distributed Generation (DG): utility-dispatchable power for peak demand response
- Islanded prime-power: oil and gas exploration, marine, remote villages, rental/mobile
- Microgrid: military, government, net-zero communities, universities
- Utility paralleling: peak shaving, demand curtailment
- Cogeneration (CHP [combined heat and power]): wastewater treatment, biogas production/containment
- Switchgear upgrades: generator control retrofit to add load sharing/paralleling capability
Product Specifications
Technical Manuals
Series
|
Package
|
Software Version
|
Manual No.
|
EN
|
DE
|
3100XT
3200XT
|
P1, P1-LT
|
1.13
|
37574
|
 |
|
3400XT
3500XT
|
P1, P1-LT
|
1.13
|
37580
|
|
|
3400XT
3500XT
|
P2, P2-LT
|
1.13
|
37581
|
|
|
ERRATA
easYgen-3000XT series
|
37619
|
|
|
"What's NEW"
XT compared with non-XT easYgen |
37625 |
|
|
Wiring
terminal comparison |
easYgen P1
XT versus non-XT |
37635 |
|
|
easYgen P2
XT versus non-XT |
37642 |
|
|
Application Notes & Guideform Specifications
Applicable for easYgen-3000 and easYgen-3000XT series controls
easYgen Series
|
Document
|
Title
|
EN
|
3000XT
|
37637
|
Personalize your RP-3000XT |
|
3000XT
|
37638
|
Load shedding via Flexible Limit |
|
3000XT
|
37664
|
Periodic ECU power up |
|
3000
|
37572
|
Create complete/partial settings offline
|
|
3100XT/
3200XT-P1(-LT) |
37620 |
Guideform Specifications
|
|
1000/2000/3000
|
37576
|
Using proxonX ESENET
with Woodward controllers |
|
1000/2000/3000
|
37577
|
Using proconX ESEPRO
with Woodward controllers |
|
1000/2000/3000
|
HMSI-27-214
|
Remote access using Netbiter EC250 with
Woodward controllers
|
|
1000/2000/3000
|
37611
|
Remote connect using Netbiter EC350 with
Woodward controllers |
|
3000 and LS-5
|
37671
|
German only:
Netzentkopplung gemäß VDE_AR-N
4105 |
|
3000
|
37578
|
Distributing binary information via
CANopen PDO |
|
2000/3000
and LS-5
|
37598
|
CAN-Fiber Converter
eks DL-CAN(-R) |
|
Additional easYgen-3000XT Product Documentation List
Software
- USB driver for ToolKit connectivity
- ToolKit configuration software
Configuration Software and Files