DYNA 2000 & DYNA 2500 Actuators
Linear actuators for small engine control
DYNA 2000 and DYNA 2500 linear actuators provide precise positioning with a minimal number of moving parts. Many of the moving parts normally associated with electric actuators are eliminated, prolonging the mean time between failure.
These DYNA actuators are suitable for installation on diesel, gasoline, or natural gas engines with fuel system force requirements of less than 13 pounds (58 N) of force. When paired with a Woodward controller, precise isochronous speed control of 5 to 30 HP engines (DYNA 2000) and 5 to 60 HP engines (DYNA 2500) is achieved.
Both actuators are easy to install by mounting near the fuel system and direct connecting to the fuel control rod or lever. In most installations, the normal rotary-to-rotary connection is eliminated, resulting in a more trouble-free and accurate control system.
Put the precision of DYNA linear actuators to work on your engines.
To learn more about these actuators or where to buy them, click on the globe below.
Speed Range: 250 - 9500 Hz
Input: 2.5 Vrms minimum speed signal
Operating Voltage: 12 Vdc or 24 Vdc
Maximum Linear Output Travel: 0.8 in. (20.3 mm)
DYNA 2000:
Maximum Stall Current: 5.4 amps @ 12 Vdc; 3.0 amps @ 24 Vdc
Maximum Force Energized: 6.5 lbf. (28.9 N)
Maximum Work Output: 0.25 ft. lbs. (0.34 joules)
DYNA 2500:
Maximum Stall Current: 5.9 amps @ 12 Vdc; 3.0 amps @ 24 Vdc
Maximum Force Energized: 13.0 lbf. (57.8 N)
Maximum Work Output: 0.50 ft. lbs. (0.68 joules)
Note: "F" and "DYNA" documents are not under Woodward engineering control and are provided for historical reference only.
|
Old Item No.
|
Woodward Item No.
|
Product
Sheet
|
Tech
Manual
|
DYNC-
10202-000-0-12
|
DC10202-000-012
|
Woodward 03324
F-24405
F-24406
|
F-24419
|
DYNC-
10202-000-0-24
|
DC10202-000-024
|
DYNC-
10502-000-0-12
|
DC10502-000-012
|
Woodward 03324
F-24405
F-24815
|
DYNA 112
|
DYNC-
10502-000-0-24
|
DC10502-000-024
|
Note: "F" and "DYNA" documents are not under Woodward engineering control and are provided for historical reference only.
Old Item No.
|
Woodward Item No.
|
Product Sheet
|
Technical Manual
|
DYN1-10724-000-0-12
|
|
F-24405
F-24406
|
F-24419
|
DYN1-10724-000-0-24
|
|
DYN1-10724-001-0-12
|
8270-1020
|
DYN1-10726-000-0-12
|
8270-1023
|
DYN1-10726-000-0-24
|
|
DYN1-10704-000-0-12
|
8270-1008
|
DYN1-10704-000-0-24
|
8270-1050
|
DYN1-10704-002-0-12
|
8270-1048
|
DYN1-10704-002-0-24
|
8270-1055
|
DYN1-10706-000-0-12
|
|
DYN1-10706-000-0-24
|
|
DYN1-10706-001-0-12
|
|
DYN1-10706-001-0-24
|
|
DYN1-10714-000-0-12
|
8270-1045
|
DYN1-10714-000-0-24
|
|
DYN1-10716-000-0-12
|
|
DYN1-10716-000-0-24
|
8270-1087
|
DYN1-10752-000-0-12
|
Replaced by
DPG Series
|
F-24407
|
Woodward 36538
F-24427
|
DYN1-10752-000-0-24
|
Replaced by
DPG Series
|
DYN1-10752-001-0-24
|
Replaced by
DPG Series
|
DYN1-10753-000-0-12
|
Replaced by
DPG Series
|
DYN1-10753-000-0-24
|
Replaced by
DPG Series
|
DYN1-10753-001-0-24
|
Replaced by
DPG Series
|
DYN1-10754-000-0-12
|
8270-1015
|
DYN1-10754-000-0-24
|
8270-1038
|
DYN1-10754-001-0-12
|
8270-1018
|
DYN1-10754-001-0-24
|
8270-1036
|
DYN1-10756-000-0-12
|
8270-1051
|
DYN1-10756-000-0-24
|
Replaced by
DPG Series
|
DYN1-10756-001-0-12
|
Replaced by
DPG Series
|
DYN1-10756-001-0-24
|
Replaced by
DPG Series
|
DYN1-10744-000-0-12
|
8270-1027
|
Dyna 264
|
Dyna 203
|
DYN1-10749-000-0-12
|
8270-1042
|
Dyna 230
|
Dyna 260
|
Note: Bulletin 281 is not under Woodward engineering control and is provided as historical reference only.
Woodward Item No.
|
Product Spec |
Description
|
DYNK-10249
|
|
General purpose kit for DYNA 2000 and DYNA 2500 linear governors
|
| DYNK-10393 |
Bulletin 281 |
For DYNA 2500 linear actuator on Cummins "C" Bosch P300 "A" pump
|