Woodward

Woodward Product Training

    customer support-World image

    Woodward product training is offered on a regular basis from several Woodward locations and from many of our authorized Full-Service Distributors.

    Select a tab below for more information about training on Woodward products.

    If you need training information not covered above, please e-mail our US Training Center.

     

    Woodward Product Training in Australia

    Class Descriptions

    Centro de treinamento Woodward (Brasil)

    Woodward Product Training in India
    (The Woodward Training Centre in Gurgaon, India)

    The Woodward Training Centre classes provide technical information and hands-on experience for people who work with Woodward control systems. Whether you work with mechanical or electrical control systems, the goal of each class is to enable you to understand the following:

    • Woodward controls in general, including control functions and theory
    • Proper control operation and maintenance
    • Control adjustment and calibration procedures
    • Test procedures for checking a control's operation
    • Procedures for troubleshooting systems and techniques for problem solving

    CLASS TYPES

    Two types of classes are available to meet your training needs.

    STANDARD classes are taught at the Training Centre at Gurgaon.
    CUSTOM classes may be conducted at your site for the complete range of Woodward controls to suit your application specifically.

    ENROLLMENT

    Class size is limited to provide students better opportunities for learning. Please register early to ensure a place. To complement a class, visual aids, handouts and publications are used. The publications are for you to keep for reference. All materials for the class will be supplied.

    TO REGISTER

    To register for any of the Woodward training classes, please complete the registration form and mail it to us, along with payment. The registration confirmation will be sent after the receipt of payment and same will confirm your enrollment for the training program. Minimum of 4 students required for course to be scheduled. Maximum of 8 students per course.

    CLASS TIMES

    Most regularly scheduled classes are from 0930 hours to 1600 hours on Mondays through Fridays.

    CLASS RATES

    Our class rates do not include accommodations and transportation. Lunch and tea will be provided. A 10% discount is applicable to companies registering 4 or more participants in a single course.

    PAYMENT

    100% payment should be made in advance by NEFT/DRAFT in favor of Woodward India Private Limited and payable at NEW DELHI. (See bank information on registration form.) Service Tax is applicable on the course fee. 

     Course information and registration form.

    Product Training in Japan

    CUSTOMER TRAINING INFORMATION

     

    Currently, there are no training programs scheduled.

    Product Training in the Netherlands

    THE WOODWARD TRAINING CENTRE

    Woodward offers theoretical and practical training on a variety of Woodward products. Woodward standard training courses are currently offered in The Netherlands.

    CUSTOM COURSES
    Custom training for specific controls, applications, and products can be performed on most controls manufactured by Woodward. The on-demand custom training can be delivered at our location or at yours, depending on the requirements for the training course. To request custom training, please complete the attached request for custom training worksheet and email it to the training coordinator. We will review your request and confirm whether we can do the training for you, as well as quote you a price for the training.

    PAYMENT
    Payment terms: Payment should be settled immediately after receipt of our invoice, but at the latest 2 weeks before the course takse place.
    Bases on pro-forma.

    CANCELLATION
    For training given by Woodward Nederland B.V. in the Netherlands, you may cancel up to four weeks before the first day of your training class without cancellation charge. Cancellation within the four weeks before the first day of class results in a cancellation fee schedule as follows:

    • Within 4 weeks, a cancellation fee of 25% of the cost of the class is charged.
    • Within 3 weeks, a cancellation fee of 50% of the cost of the class is charged.
    • Within 2 weeks, a cancellation fee of 75% of the cost of the class is charged.
    • Within 1 week, a cancellation fee of 100% of the cost of the class is charged.

    You may substitute people at no additional charge.

    Woodward reserves the right to cancel any scheduled class. A full refund and adequate notification will be provided to those already signed up.

    ACCOMMODATIONS
    We suggest you make arrangements for room reservations on your own. Woodward recommends the following hotels close to our facility, which offer Woodward rates (mention Woodward):

    • Courtyard by Marriott Amsterdam Airport (phone: +31.(0) 23 55 69 000
    • Carlton Square Hotel, Haarlem, (phone: +31.(0) 23 531 90 91
    • Hotel de Beurs, Hoofddorp (phone: +31.(0) 23 5634234
    • Inntel Hotel Amsterdam (phone: +31.(0) 20 530 1818

    In case of any problems, please contact us for assistance.

    Product Training in Singapore

    SINGAPORE TRAINING CENTRE
    PM Control Systems Pte Ltd

    The Singapore Training Centre offers theoretical and practical training on many Woodward products. The training facility contains several demonstration models and simulation set-ups for standard and customized Woodward controls.

    CLASS TYPE

    Two types of classes are available to meet your training needs:

    Custom training courses are available at the customer's request. The custom training for specified controls, applications, and products can be performed on most Woodward controls other than Aircraft products, and can also be given on-site at the customer's request. Please contact our training centre with any special requirements you may have.

    The standard courses cover many Woodward controls. In these courses, Woodward controls are explained with the background of a particular application. The listed training courses are based on a selection of all Woodward products and are designed to be beneficial to all our customers.

    ENROLLMENT

    Class size of the scheduled courses is limited to provide trainees better opportunities for learning and hands-on experience. To complement a class, visual aids, hand-outs, and publications are used. The publications are yours to keep for reference. All material for the class will be supplied.

    Please register early to ensure availability. Each standard course will continue when there are at least 3 trainees registered. Note: Each course is limited to maximum number of 8 trainees.

    REGISTER

    To register for any of the training classes, kindly email to kitweng@pmcontrol.com.sg. We will send you a confirmation for the class you will be attending. All registrations must be in advance, preferably at least four weeks before start of the course.

    CLASS HOURS

    All classes are scheduled from 9:00 a.m. (09:00) through 4:30 p.m. (16:30).

    CLASS RATES

    Our class rates do not include accommodation or transportation. Light lunch and refreshments (tea/coffee) will be provided.

    PAYMENT

    Payment arrangements for all standard classes are to be made at least ten business days before class commencement. We accept payment either in cheque or wire transfer. An invoice will be issued.

    CANCELLATION

    If you must cancel, please notify us as soon as possible. A full refund will be made to those cancelling at least three weeks prior to class. Otherwise, cancellations are subject to a $350.00 (SGD) cancellation fee. A substitute attendee is permitted up to the starting day of the course only.

    We reserve the right to cancel any scheduled class. A full refund and adequate notification will be provided to those already signed up.

    ACCOMMODATION

    Please make arrangements for room reservations directly.

    SINGAPORE TRAINING CENTRE COURSES

    COURSE LISTING (click on course to see description)

    Product Training in the United States

    Woodward and its authorized distributors offer theoretical and practical training on many Woodward products. Woodward standard and custom training courses are currently offered in several locations: California, Colorado, Delaware, Florida, Louisiana, Michigan, Texas, Virginia, & Washington state. You can also arrange for custom training at your site.

    CLASS TYPES
    Two types of classes are available to meet your training needs:

    1. Custom Training Courses
    Custom training for specific controls, applications, and products can be performed on most controls manufactured by Woodward. The on-demand custom training can be delivered at our location or at yours. To request custom training, please complete the attached Request for Custom Training Worksheet and email it to the Colorado Training Center. We will review your request and confirm whether we can do the training for you, as well as send a formal quote for training.

    2. Standard Courses
    Standard classes cover a combination of Woodward controls as used in practical situations. In these courses, Woodward controls are explained with the background of a particular application. The listed training courses are based on a careful selection of all Woodward products and are meant to be beneficial to a wide range of customers.

    STANDARD TRAINING CLASS INFORMATION

    Registration
    Standard Woodward training classes are held at several US locations: at Woodward in Fort Collins/Loveland, Colorado; at Governor Control Systems in Fort Lauderdale, Florida, & Mandeville, Louisiana; at Drake Controls - West in San Dimas, California; and at Peaker Services in Brighton, Michigan, & New Castle, Delaware. To register for any of the standard Woodward training classes, please register directly with the desired location. Registration should be made at least two weeks before the start of the course (please, no drop-in registrations). All class confirmations will be sent out about two weeks prior to the course and only when we have received all required information.

    In addition, Basic MotoHawk Training is offered at Woodward's Ann Arbor, Michigan, facility. This 3-day program covers MATLAB/Simulink, MotoHawk, and MotoTune. Please contact MotoHawk Training for more information.

    Woodward / Colorado

    Drake Controls / Texas

    Drake Controls - West / California

    Governor Control Systems / Florida

    Governor Control Systems / Louisiana

    Governor Control Systems / Virginia & Washington state

    Peaker Services / Delaware

    Peaker Services / Michigan

    TRAINING SCHEDULE
    Note that classes are offered in multiple locations, indicated on the schedule. Please register for classes by contacting the location directly.

    • CO—Woodward, 1000 E. Drake Road, Fort Collins, Colorado; 1-800-523-2831
    • DE—Peaker Services/Delaware, 4060 North Dupont Highway, Suite 10, New Castle, Delaware; 1-302-356-1552
    • FL—Governor Control Systems, 3101 SW 3rd Avenue, Fort Lauderdale, Florida; 1-877-659-6328
    • LA—Governor Control Systems, 2022 Tamvest Court, Mandeville, Louisiana; 1-888-427-4853
    • CA—Drake Controls - West, 357 East Arrow Highway, Ste 204, San Dimas, California; 1-877-602-3743
    • MI—Peaker Services/Michigan, 8080 Kensington Court, Brighton, Michigan; 1-800-622-4224

    COURSE LISTING
    (click on course to see description)