|
LeoPC1 is a service tool to be used by plant operators with the control systems created by Leonhard-Reglerbau of Stuttgart, Germany. LeoPC1 provides the following features:
- Display of measured variables or the logical statuses of your plant
- Configuration of the configurable devices used in your plant
- Standard values of your devices can be stored for restoring or transferring
- Remote control of the controllable devices used in your plant
- Logging of selected data and measured values or events of your plant
- Events of the corresponding devices can be read out and printed
- Language management and loading for the display of your adaptable devices
- Alarm logging, management and preparation for your plant
LeoPC1 can be installed to operate in English, German and Portuguese.
LeoPC1 does not require software license authorization to run.
Manuals
- Pentium® 266 MHz PC
- 64 MB of RAM
- Windows® 98, NT 4.0, 2000 and XP or greater (Windows XP or 2000 preferred)
- 800 by 600 pixel screen
- Serial Port
- USB Port
- IXXAT USB-to-CAN Compact converter for CAN communications support.
- Woodward Direct Serial Converter (Part No: 5417-557) for serial communications support.
- Woodward Gateway Interface Converter (Part No. 5448-910) for common modem communications support.
- The first step in installing LeoPC1 is to download the file from this page. This file is an installation program that will step you through the installation process.
- After downloading this file, run it and follow the instructions on the setup dialogs.
- Obtain the plant configuration files appropriate for you installation from a Woodward application engineer or take those you have received with your devices and install them to your computer.
- Run LeoPC1 from the start menu and open your plant configuration file.
LeoPC1 3.1.1 is also available on CD-ROM.
Woodward part number: 8447-1001
Please contact your vendor to purchase software licenses or CD-ROM kits.
|
