SYNCONpanel
Woodward Provides Transportable Remote Synchronizing Panel
Woodward’s SYNCONpanel is used to connect a mobile generating set to an MCP (mains coupling point). The mains coupling device in this application is a manual operated breaker, connector, or fuses.
For connecting the mobile generating set, integrated current sensing at the SYNCONpanel transfers the load from the mains to the generating set by soft loading. This enables the user to remove fuses or connectors without load.
For disconnecting the mobile generating set, the SYNCONpanel will phase match the frequency and voltage between the mains and the mobile generating set at the MCP, so a manual operation of the mains breaker or fuses is possible.
A built-in synchronous scope gives the operator clear indication of phase shifts.
The user can configure wiring schemes for a one-phase up to a three-phase synchronization system. (A three-phase is recommended for better safety conditions).
The SYNCONpanel is used in conjunction with Woodward’s genset controller package: GCP-31 Rental (Package RPQ+SC09).
Features include:
- True RMS voltage (A and B side)
- True RMS current (A side)
- Synch-check functionality
- Remote control of frequency, voltage, real power, and power factor
- Zero-phase-angle-control
- Power transfer zero control (softload)
- Two-line LC display
Specifications
Power supply
|
12/24Vdc
(18 to 32 Vdc)
|
Consumption
|
max.
12W
|
Ambient temperature
|
-20 to 70 °C / -4 to 158 °F
|
Ambient humidity
|
95 %, non-condensing
|
Voltage AC input
|
230 Vac true RMS
|
Accuracy
|
Class 1
|
Current AC input
|
1A true RMS
|
Accuracy Iac
|
Class 1
|
Relay outputs
|
Potential free
|
Housing
|
|
Portable case
|
Plastic
|
Dimension (WxHxD)
|
270 × 174 × 246 mm
|
Sealing (closed
case/opened case)
|
IP65/IP20
|
Weight
|
Approx. 3,300 g
|
Approvals
