CLOSE
9907-1287

VariStroke II Servo

Servovalve (V90V-E)

The new industry standard electro-hydraulic linear actuator used in the most demanding environments providing superb accuracy and resolution for stable, reliable and safe operation of steam turbine control valves or valve racks. Used on mechanical-drive or generator-drive steam turbines, the robust design with 50 lbf chip shear force, and self-cleaning port design uses a low-pressure hydraulic oil source (typically turbine lube oil) for output shaft force. The V90TD-2530-MBE is an integrated double acting bottom mount 250mm bore/300mm linear stroke fail-extend male-thread shaft actuator for steam and hydro turbines. The new industry standard electro-hydraulic linear actuator used in the most demanding environments providing superb accuracy and resolution for stable, reliable and safe operation of steam turbine control valves or valve racks. Used on mechanical-drive or generator-drive steam turbines, the robust design with 50 lbf chip shear force, and self-cleaning port design uses a low-pressure hydraulic oil source (typically turbine lube oil) for output shaft force. The V90V-E is a remote double acting fail-extend servovalve used to drive a Woodward or OEM power cylinder for steam and hydro turbines.
Product Type
  • Application Notes
  • Brochure
  • Product Specification
  • Software Manual
  • Technical Manual
  • Software
FEATURES & FUNCTIONALITY
Varistroke II servovalves solves steam turbine users #1 reliability problem...dirty oil!
 
The patented dirt tolerant and self-cleaning technology of Woodward's VariStroke servovalve ensure greater overall reliability of your steam turbine. The VariStroke line of linear electro-hydraulic valve servovalves operate mechanical-drive or generator-drive steam turbines. These servovalves utilize a low-pressure, hydraulic oil source (typically turbine lube oil) to provide output to a cylinder shaft. Their superb accuracy and resolution make them ideal for steam valve control and related turbine speed and load control, where turbine up-time and availability is essential.
 
The VariStroke line is configurable via a simple user-friendly, computer-based PC service tool, allowing users to easily configure, calibrate, and adjust all internal functions and response settings. Its integrated driver includes a 4-20 mA output channel to indicate output shaft (control valve) position, as well as unit alarm and shutdown relay outputs for use as unit health and status indications. The 4-20 mA demand inputs and dual-redundant shaft position sensors allow it to continue to operate even with demand input or feedback sensor failures, ensuring extended run-times between forced outages and on-line system repair.
 
The total installed cost for this servovalve is low because it is completely assembled and tested at the factory, greatly reducing OEM and end-user fabrication, testing, and site assembly time. In retrofit applications, the VariStroke servovalve can be used to directly replace the existing servo system. This saves costly repairs to existing and aging servos, eliminates the difficulty of obtaining spare parts for obsolete equipment, and reduces calibration time and difficulty.
 
Dirt-tolerant design:
Two moving parts
105 lb chip shear force
Self-cleaning valve design
 
Variable / configurable shaft stroke lengths
 
Fast slew rates/times:
Up to 10 inches/second (254 mm/s)
 
Precise position control
 
Integrated driver:
4–20 mA or CAN open
Included valve flow linearization table
 
Redundant CANopen network communications
 
Redundant LVDT position sensor available
 
Certified for Hazardous Locations 

How can we help?

Download Manuals

Downloads & Manuals

Software and information is available on Woodward.com.

Product History Lookup

Product History Lookup

Look up your Woodward product by serial number.

Woodward Support

Support

We're here for you, call, email, or open a helpdesk ticket.

 

Download

Brochure
Name
Item Number
Language
VARISTROKE LINEAR ELECTRO-HYDRAULIC VALVE ACTUATOR BROCHURE
51471
English
Product Specification
Name
Item Number
Language
VARISTROKE-II ELECTRO-HYDRAULIC ACTUATOR
03378
English
Technical Manual
Name
Item Number
Language
VARISTROKE-II (VS-II) ELECTRO-HYDRAULIC ACTUATOR
26740
English

Software

Name
Item Number
Revision
Varistroke Tools
9927-2325
B
X
Cookies help us improve your website experience.
By using our website, you agree to our use of cookies.
You can find more details in our Policy Statement.
Ok