ProTech Tools

9927-1810_J.exe

The ProTech® GII Service Tool Software is used to configure, monitor and troubleshoot a ProTech® GII Overspeed Protection Device.

The ProTech® GII Service tool supports the following firmware part numbers: 5418-3654 rev A, 5418-3654 rev B, 5418-3654 rev C, 5418-6274 rev NEW, 5418-6347 revs NEW, A (Voted Inputs), 5418-7000 revs NEW, A (Voted Inputs), 5418-7349 rev - (Math Enhancements).

System Requirements:

Microsoft Windows®  10, 8.1, 7, Vista (32- & 64-bit) or later.

Microsoft .NET Framework version 4.5.1

1 GHz or faster x86 or x64 processor

1GB of RAM

Minimum 800 by 600 pixel screen with 256 colors

Recommended screen resolution 1024 x 768 or higher

9 pin-D Serial Port (RS232)

9 pin-D straight through Serial Cable (not a null modem cable)

Installation Instructions:

1. The first step in installing is to download the file from this page. This file is an installation program that will step you through the installation process.
2. After downloading this file, run it and follow the instructions on the setup dialogs.