Home 5418-7830.OBJ_E

5009 Tools

5418-7830_OBJ_E.zip

Executable GAP Software for the 5009XT Standard Steam Turbine MicroNet TMR control system.
This file can be loaded onto the control CPU’s using AppManager.

System Requirements:

  • Control System part numbers 8262-1141, 8262-1142, or 8262-1143
  • CPU part number 5466-1347

Installation Instructions:


  1.    Update the GAP application using the following procedure:

    • If unit has been configured: Download the current tunable settings file from the control. If unfamiliar with using Control Assistant, refer to 5009XT manual 35135V2, Appendix J for step-by-step instructions on “Retrieving Control Tunables” from the 5009XT.
    • If unfamiliar with using AppManager, refer to 5009XT manual 35135V2, Appendix G for step-by-step instructions.
    • Using AppManager, in the Control application view panel, Stop the application by selecting Control/Stop Application or the Maroon Square button on the right side Toolbar.
    • Under Control menu, select Transfer Application Files.
    • In the dialog box that opens browse to find the new GAP executable file named: 5418-7830_<Rev>.out
    • When transfer is complete, select the file and start the application by selecting Control/Start Application or the Blue Triangle button on the right side Toolbar.
    • If unit was configured: Upload the current tunable settings file (from step 1) from your PC into the control. Refer to 5009XT manual 35135V2, Appendix J, “Sending Control Tunables”.
    • Procedure complete. The application file is now in AutoStart, and the control will boot up normally after any power cycle.

Download:

Item Name Version Size
5418-7830.OBJ
5009 Tools
E
101.44 MB