- Application Notes
- Brochure
- Product Specification
- Software Manual
- Technical Manual
- Software
The easYlite-200 is designed to remotely display the status of a Genset control system through a CAN bus or a Modbus RS-485 interface. The easYlite-200 may be used in applications where a remote status indicator is required, which is directly controlled by the generator control unit.
The annunciator provides 16 configurable LEDs. Up to two annunciators can be interfaced with one easYgen. Three colors (Amber, Green and Red) are available for each LED indication. The user may assign either blink or illuminate should an alarm status change.
The monitored status are transmitted from the easYgen to the easYlite-200. The easYlite-200 LEDs change their state if the assigned warning / alarm condition occurs or the status conditions change.
The annunciator is equipped with selfdiagnostic checks and status LED to indicate the connection and LED lamp status to ease the troubleshooting.
The easYlite-200 is equipped with a relay to operate an external alarm horn or to signal connection status.
The unit is configured with a PC via USB interface using ToolKit-SC service tool.​