LeoPC1

5418-1360_E.msi

LeoPC1 is a service tool to be used by plant operators with the control systems created by Woodward GmbH of Stuttgart, Germany. LeoPC1 provides the following features:

• Display of measured variables or the logical statuses of your plant
• Configuration of the configurable devices used in your plant
• Standard values of your devices can be stored for restoring or transferring
• Remote control of the controllable devices used in your plant
• Logging of selected data and measured values or events of your plant
• Events of the corresponding devices can be read out and printed
• Language management and loading for the display of your adaptable devices
• Alarm logging, management and preparation for your plant

LeoPC1 can be installed to operate in English, German and Portuguese. LeoPC1 does not require software license authorization to run.

System Requirements:

• Pentium® 266 MHz PC
• 64 MB of RAM
• Windows XP, Windows 7 or higher
• 800 by 600 pixel screen
• Serial Port
• USB Port
• IXXAT USB-to-CAN Compact converter for CAN communications support.
• Woodward Direct Serial Converter (Part No: 5417-557 or 5417-1251) for serial communications support.
• Woodward Gateway Interface Converter (Part No. 5448-910) for common modem communications support.

Installation Instructions:

1. The first step in installing LeoPC1 is to download the file from this page. This file is an installation program that will step you through the installation process.
2. After downloading this file, run it and follow the instructions on the setup dialogs.
3. Obtain the plant configuration files appropriate for you installation from a Woodward application engineer or take those you have received with your devices and install them to your computer.
4. Run LeoPC1 from the start menu and open your plant configuration file.
5. If CAN connection using IXXAT CAN modules is wished, an IXXAT CAN driver VCI 3.5.1 or higher has to be installed separately. Drivers for that can be found at http://www.ixxat.com