MicroNet™ Control Service Packs

9927-1578_NEW.exe

This service pack (9927-1578) is for the Micronet Plus™ VxWorks Control. The Service Pack will upgrade the 5418-2566 footprint to Revision E. This release - Enables UDP Multicast and Broadcast functionality for EGD. Corrects an issue with longfilenames occasionally not being writing properly to the filesystem. Resets the MPC5200 PCI Arbiter and the SCLPC FIFO whenever the application calls FpgaInit(). After downloading this file, you will install this service pack using AppManager from your desktop or laptop computer. For instructions on installing the service pack on a CPU, refer to the AppManager help. AppManager Help is started under the Help menu. For instructions on installing the service pack on an RTN, please refer to Application Note B51297 that can be found at http://www.woodward.com/pdf/ic/51297.pdf

System Requirements:

AppManager 2.5 or higher Control Assistant 1.1-3 or later Monitor Gap 2.14 WatchWindow Standard or Professional 1.5.2 WatchWindow II 2.4

Installation Instructions:

After downloading this file, you will install this service pack using AppManager from your desktop or laptop computer. For instructions on installing the service pack, refer to the AppManager help. AppManager Help is started under the Help menu.For systems that have expansion chassis it is important that both the CPU and the RTN modules have the same footprint part number and revision. For instructions on installing the service pack on an RTN, please refer to Application Note B51297.