MicroNet™ Control Service Packs
9927-1528_NEW.exe
This service pack (9927-1477) is for the Micronet Plus™ VxWorks Control. The Service Pack will upgrade the 5418-2408 footprint to Revision E. This release corrects a problem with Coder 4.04 starting the RTN’s. The number of system buffers has also been increased to allow startup of 7 RTN chassis. After downloading this file, you will install this service pack using AppManager from your desktop or laptop computer. For instructions on installing the service pack on a CPU, refer to the AppManager help. AppManager Help is started under the Help menu. For instructions on installing the service pack on an RTN, please refer to Application Note B51297 that can be found at http://www.woodward.com/pdf/ic/51297.pdfSystem Requirements:
AppManager 2.5 or higher Control Assistant 1.1-3 or later Monitor Gap 2.14 WatchWindow Standard or Professional 1.5.2 WatchWindow II 2.4Installation Instructions:
After downloading this file, you will install this service pack using AppManager from your desktop or laptop computer. For instructions on installing the service pack, refer to the AppManager help. AppManager Help is started under the Help menu.For systems that have expansion chassis it is important that both the CPU and the RTN modules have the same footprint part number and revision. For instructions on installing the service pack on an RTN, please refer to Application Note B51297.Download:
Item | Name | Version | Size | |
---|---|---|---|---|
9927-1528
|
MicroNet™ Control Service Packs
|
NEW
|
2.76 MB
|