DTSC-200-55B

CONTROL-DTSC-200-55B

The DTSC-200 is the ultimate control for new ATS (automatic transfer switch) builds and retrofits. A complete measurement and protection package, it easily configures to Utility-to-Generator, Generator-to-Generator, or Utility-to-Utility systems for open, delayed, or closed-transition transfer with synch-check to ensure the smoothest possible transfer.

Product Type

About 8440-1868

Automatic Transfer Switch Controller

Application Notes
Brochure
Product Specification
Software Manual
Technical Manual
Software

FEATURES & FUNCTIONALITY

Woodward’s DTSC-200 is the ultimate control for new ATS (automatic transfer switch) builds and retrofits. A complete measurement and protection package, it easily configures to Utility-to-Generator, Generator-to-Generator, or Utility-to-Utility systems for open, delayed, or closed-transition transfer with synch-check to ensure the smoothest possible transfer.

High-end features like transfer inhibit, source priority selection, load shed, motor load disconnect, elevator pre-signal, and engine exerciser timers come standard in this incredibly versatile, cost-effective control.

Features:

Configurable for open, delayed, and closed transition transfer
Configurable for Utility-to-Gen, Generator-to-Generator, and Utility-to-Utility applications
Closed transition transfers can be accomplished in times < 100ms
In-phase monitoring (sync-check)
Load/no load test functionality
Engine exerciser (load/no load test) routine with fully adjustable interval
Peak shaving mode
Load shedding
Extended parallel time (for closed transition transfers that take longer than 100ms)
Transfer and/or re-transfer inhibit
Source priority selection
Elevator pre-transfer and motor load disconnect timers
Event/Alarm log system with real time clock
Internal breaker interlock utilizing discrete inputs for breaker position detection
Freely configurable discrete I/O with support for external I/O expansion units (e.g. Woodward IKD 1)
RS-232, RS-485 and CAN bus interfaces for remote control and visualization purposes
Supports CANopen and Modbus RTU protocols
PC and/or front display configuration
128x64 pixels graphic LCD display
LogicsManager provides programmable logic functions that eliminate relay logic or PLC`s
True RMS voltage, current and power sensing
LEDs for source availability and breaker status