MENU CLOSE
Woodward Logo
CLOSE
Search
Home Controls Safety Systems 8237-1595
Zoom
Zoom
Zoom
Zoom
Zoom
* Image may not reflect selected features
8237-1595

ProTech-GII

HV/HV, IR, VI

The ProTech-GII is a configurable overspeed detection system designed to safely shut down steam, gas, and hydro turbines of all sizes upon sensing an overspeed or overacceleration event. Available in two dual redundant trip relay outputs using a 2-out-of-3 voted architecture, or with three independent non-voted trip relay outputs with individual alarm relays, 4–20 mA speed readouts, and Modbus® communications making this overspeed device easy to integrate into any turbine safety system. This ProTech GII model is a bulkhead mount, high voltage/high voltage power input, independent relays/voted inputs safety device for steam turbine overspeed protection.
Product Type
  • Application Notes
  • Brochure
  • Product Specification
  • Software Manual
  • Technical Manual
  • Software
FEATURES & FUNCTIONALITY

Acceleration Detection

  • Optionally the ProTech-GII can be configured to protect a turbine from high acceleration events also. The derivative of the speed signal is used to detect turbine acceleration and issue an associated trip command.

MPU Detection

  • Each module’s speed sensor input uses special MPU open-wire detection circuitry to validate that the MPU is properly connected before turbine operation, and special loss-of-speed detection logic to validate MPU functionality during turbine operation.

Automatic Overspeed Test Routine

  • Optionally the ProTech-GII can be configured to routinely perform an overspeed test of each module, then log and report the test results. With this test routine, each module goes through its test sequence using an internal frequency generator to simulate an overspeed condition.

Sulfur Contamination Resistant

  • The ProTech-GII utilizes a special conformal coating material that has demonstrated excellent long-term protection against H2S and SO2 gases at levels classified in international standard IEC 721-3-3 1994 - environment Class 3C2.

On-line Repair

  • The ProTech-GII’s triple-modular design allows users to easily replace one of its modules (A, B, C) while the turbine is on-line and operating normally. Ease of replacement is enhanced by the unit’s backplane plug-and-operate structure, and its module-to-module learning function. 

Download

Brochure
Name
Item Number
Language
PROTECTING YOUR ASSETS--SAFETY SYSTEMS FOR TURBINES AND COMPRESSORS
51483
English
Download
Product Change Notification
Name
Item Number
Language
PROTECH GII
06946
English
Download
Product Specification
Name
Item Number
Language
PROTECH-GII OVERSPEED PROTECTION DEVICE
03370
English
Download
Technical Manual
Name
Item Number
Language
PROTECH-GII W/ VOTED INPUTS INSTALLATION PROCEDURE SUPPLEMENT FOR MANUAL 26709
26863
English
Download
PROTECH-GII OVERSPEED PROTECTION DEVICE WITH VOTED INPUTS
26709
English
Member Sign In